MP-1600
The MP-1600 module is designed for loading horizontal boreholes (slope no more than 5°) with a diameter of 36 to 76 mm and a depth of up to 6 m during tunneling, cleaning, and mining operations with emulsion explosive (EVV) "Sibirites -700Sh and -800Sh", TU 3602 -039-05608605-2015, manufactured during the loading process by mixing the Sibirit emulsion with one or two gas generating additives (GGD).
Underground module MP-1600 is used for loading at ambient temperature from plus five °C to plus 40 °C.
Quantity of EVV produced from single loading of the module - up to 1600 kg. The time to bring the module into the working position from the transport position is no more than 20 minutes. The time for flushing the equipment and bringing the module to the transport position after loading is no more than 30 minutes.
| Maximum productivity of the emulsion pump, kg/min | 30+3 |
| Charging hole parameters - depth, no more than, m - diameter, mm - angle of inclination to the horizon, ° | 6 from 36 to 76 5 |
| Charging hose length, no more than, m | 25 |
| Hydrostation supply voltage, V/A | 380/15 |
| Internal volume of module tanks, l - emulsions -YGD - water irrigation (VO) | 1170 2х50 2х70 |
| Dimensions, no more than, mm - length - width - height | 2100 1340 1750 |
| Own weight, no more than, kg | 1200 |
| Total mass of the module, no more than, kg | 3000 |
MP-500
The MP-500 underground driving machine is based on the MD-08 chassis (manufactured by the Republic of Belarus).
Underground driving machine MP-500 is designed for loading horizontal and inclined boreholes (slope no more than 5°) with a diameter of 36 to 76 mm and a depth of up to 6 m during tunneling, cleaning, and mining operations with emulsion explosive (EVV) "Sibirity-700Sh and 800Sh", TU 3602-039-05608605-2015, manufactured during the loading process by mixing the Sibirit emulsion with special additives.
The MP-500 machine is used for loading at ambient temperatures from plus five °C to plus 40 °C. When driving on the outer surface in the open air, the operating temperature is from minus 35 ° C to plus 30 ° C.
The amount of EHV produced from a single load of the machine is up to 700 kg. The time for bringing the machine into the working position from the transport position is no more than 30 minutes. The time for washing the equipment and bringing the machine to the transport position after loading is no more than 40 minutes.
| Maximum productivity of the emulsion pump, kg/min | 30+3 |
| Charging hole parameters - depth, no more than, m - diameter, mm - angle of inclination to the horizon, ° | 6 from 36 to 76 5 |
| Charging hose length, no more than, m | 17 |
| Hydrostation supply voltage, V/A | 380/15 |
| Internal volume of module tanks, l - emulsions -additive 1 - additive2 - water irrigation (VO) | 480 15 30 2х30 |
| * Dimensions, not more than, mm - length - width - height (with railings folded) - height (with railings raised) | 4300 1900 2300 3400 |
| Curb weight, no more than, kg | 2900 |
| Total mass of the module, no more than, kg | 3850 |
MSZP-4
The MSZP-4 machine is designed for loading vertical and inclined wells with a diameter of 60 mm to 120 mm, a depth of up to 40 m with an angle of inclination to the horizon from 0° to 90° during cleaning and mining operations with emulsion explosives (EVV) "Sibirites" manufactured by in the process of loading by mixing the Sibirit emulsion with gas generating additives (GGD).
The MSZP-4 vehicle is used for loading at ambient temperatures from plus 5 °C to plus 45 °C.
The amount of EHV produced from a single load of the machine is up to 4000 kg. The time to bring the module into the working position from the transport position is no more than 20 minutes. The time for washing the equipment and bringing the machine to the transport position after loading is no more than 30 minutes.
* – when using PAUS UNI 50-3 chassis
| Maximum productivity of the emulsion pump, kg/min | from 50 to 100 |
| Charging well parameters - depth, no more than, m - diameter, mm - angle of inclination to the horizon, ° | 40 from 60 to 120 from -15 to 90 |
| Charging hose length, no more than, m | 65 |
| Electrical equipment supply voltage, V | 24 |
| The internal volume of the tanks of the machine, l - emulsions - GGD - washing water | 3000 2х80 2х60 |
| Dimensions, no more than, mm - length - width - height | 12000 2500 3400 |
| Machine weight without load, no more than, kg * | 13500 |
| Permitted maximum weight of the machine, no more than, kg * | 17500 |
MSZP-4 modification (U)
The underground mixing and charging machine with the MSZP-4 module, modification (U), is manufactured in accordance with TU 3145-045-05608605-2018 and is designed for loading vertical and inclined wells with a diameter of 60 to 120 mm, a depth of up to 40 m with an angle of inclination to the horizon from 0° to 90° during cleaning and mining operations, as well as holes with a diameter of 40-60 mm, emulsion explosives (EVV) "Sibirites", made in the process of loading by mixing the emulsion "Sibirit" with gas generating additives (GGD).
*when using chassis PAUS UNI 50-3
| Maximum productivity of the emulsion pump, kg/min | 70+3 |
| Charging well parameters - depth, no more than, m - diameter, mm - angle of inclination to the horizon, ° | 40 from 40 to 120 from 0 to 90 |
| Charging hose length, no more than, m | 65 |
| Electrical equipment supply voltage, V | 24 |
| The internal volume of the tanks of the machine, l - emulsions - GGD - washing water | 3000 2х80 2х60 |
| Dimensions, no more than, mm - length - width - height | 8250 2000 2700 |
| Machine weight without load, no more than, kg * | 9500 |
| Permitted maximum weight of the machine, no more than, kg * | 13500 |